Suggested Searches

3 min read

Sunshield Layers Fully Integrated on NASA’s James Webb Space Telescope

The five sunshield layers responsible for protecting the optics and instruments of NASA’s James Webb Space Telescope are now fully installed.

Northrop Grumman Corporation in Redondo Beach, California who designed the Webb telescope’s optics and spacecraft bus for NASA’s Goddard Space Flight Center in Greenbelt, Maryland, integrated the final flight layers into the sunshield subsystem. The team is now folding and stowing the layers, in preparation for deployment tests in August.

View from above as the final layer of the Webb sunshield is installed. The sunshield is made of thin silver kapton shaped like a diamond.
The first layer of the Webb telescope sunshield installed at Northrop Grumman’s clean room in Redondo Beach, California.
Credits: Northrop Grumman Corp.

The sunshield layers work together to reduce the temperatures between the hot and cold sides of the observatory by approximately 570 degrees Fahrenheit. Each successive layer of the sunshield, made of kapton, is cooler than the one below. All layers were installed and tested in June and July 2017 at Northrop Grumman Corporation’s Space Park facility in Redondo Beach.

All 5 layers of the silver kapton sunshield installed. They are stacked with a few inches between each one.
All 5 layers of the Webb telescope sunshield installed at Northrop Grumman’s clean room in Redondo Beach, California. The five sunshield membrane layers are each as thin as a human hair.
Credits: Northrop Grumman Corp.

“This is a huge milestone for the Webb telescope as we prepare for launch,” said Jim Flynn, Webb sunshield manager, Northrop Grumman Aerospace Systems. “The groundbreaking tennis court sized sunshield will shield the optics from heat and assist in providing the imaging of the formation of stars and galaxies more than 13.5 billion years ago.”

“All five sunshield membranes have been installed and will be folded over the next few weeks,” said Paul Geithner, deputy project manager – technical for the Webb telescope at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.

The Webb telescope’s sunshield will prevent the background heat from the sun from interfering with the telescope’s infrared sensors. The five sunshield membrane layers, designed and manufactured by the NeXolve Corporation in Huntsville, Alabama, are each as thin as a human hair. Because the sunshield is the size of a tennis court, it helps solidify the Webb telescope as the largest ever built for space. The sunshield, along with the rest of the spacecraft, will fold origami-style into an Ariane 5 rocket.

A thin silver kapton layer is added to the sunshield by two orange cranes.
The sunshield layers work together to reduce the temperatures between the hot and cold sides of the observatory by approximately 570 degrees Fahrenheit. Each successive layer of the sunshield, which is made of Kapton, is cooler than the one below. The sunshield is in the clean room at Northrop Grumman Aerospace Systems in Redondo Beach, California.
Credits: Northrop Grumman Corp.

The Webb telescope is the world’s next-generation space observatory and successor to the Hubble Space Telescope. The most powerful space telescope ever built, the Webb telescope will observe distant objects in the universe, provide images of the first galaxies formed and see unexplored planets around distant stars. The Webb Telescope is a joint project of NASA, the European Space Agency and the Canadian Space Agency.  

For more information about the Webb telescope, visit: www.nasa.gov/webb or www.jwst.nasa.gov

Jessica Brown
Northrop Grumman Aerospace Systems, Redondo Beach, Calif.
Jessica.Brown2@ngc.com

Rob Gutro
NASA’s Goddard Space Flight Center, Greenbelt, Md.
301-286-4044
Robert.j.gutro@nasa.gov